Ideal for Residential and Commercial use
Oscillation: Oscillation covers 30 degrees right/left from center or put into a fixed position. If fan Is mounted in the corner of the space, it can be pivoted and secured on the bracket to change the oscillation span more to the left or right.
3 speed control: Choose from the control on the motor or on the cord. Cord length from fan to speed controller: ~ 64 inches, Cord length from speed controller to plug: ~ 96 inches. Total Length of power cord 160 inches. The fan comes fully assembled. Suggested Fan Install Height is 8-10 Feet
Very Quiet Running: Quieter than most outdoor fans. The fan shroud creates a white noise which is more soothing then annoying. Db Sound Level Speed 1 62 Db, Speed 2 64 Db, Speed 3 70 Db
Easy Tilt Ratchet System: Adjust tilt tool-free by simply pushing the fan head up or pulling it down. As the fan clicks vertically, it will lock in position.
Outdoor Rated: Fan head comes fully assembled w/ sealed motor to protect from rain. This Fan has premium-quality electrolysis nickel plating. Finish is weather resistant which prevents unsightly weathering. Built in electrical fuse in plug protects motor from power surges (2 extra fuses included)
Fan Blade: is made of durable hard mold resistant resin and spins 3 airspeeds -3500 CFM, 4200 CFM, and 5100 CFM.
Mounting Bracket Included: A wall mount bracket and anchors for both wood or concrete are included for multiple installation options. Ceiling Mount or floor base also available
Can be used with our misting rings and pumps ( Not included )
Cleaning: Fans can be used in a complete open aired environment. Cleaning is also easy; simply hose down to wash with a mild detergent and rinse
The fan also comes with a weather protective black vinyl cover to protect from dust, sun, bugs etc.
Features
- 3 Fan Speeds (3500,4200,5100 CFM)
- Integrated Chrome Fan Guard with capability to be easily retrofitted for Misting
- Wall Mount Bracket and Anchors included
- Weather Resistant Electrolysis Nickel Plating
- Easy Ratchet Fan head Tilt Mechanism
- Oscillating
- Very quiet Running
- Available in 4 colors
- 0.15 HP
- 1.57 AMPS
- 1 year warranty
Dimensions
H: 21.3" x W: 21.3" x D: 15"
24.3LBS
Shipping
PLEASE NOTE: EXPEDITED SHIPPING IS NOT AVAILABLE ON FANS
What Size Fan Do I Need?
What size fans do I need and how many? A good rule of thumb is that if you are mounting fans above 10 feet with no cover, go with 24inch fans. Anything below 10 feet, 18inch fans are more than sufficient for air flow/mist coverage and also better visually. 6' to 8' height , use 14" or 18" fans. Our fans run quieter than most but our 24- inch fan mounted at 8 ft may be too much noise for smaller outdoor living spaces. Quantity of fans is usually determined by first knowing if there is any wall protection from sun/wind and also if the space is covered. If so, sometimes you can get away with less fans. Spacing fans typically around 15 to 20 ft from each other is recommended in larger open environments. Your fan placement also is considered by power location, mounting locations (pole, wall or ceiling) and again, aesthetics.
Free Shipping On All Orders Over $50
(916) 308-3856
